12
For Locked Temperature
1.
First, remove the temperature knob concealing cap and then the screw using the
3 mm hexagonal wrench (supplied).
2.
Pull off the hub.
3.
Rotate the spindle until required maximum blend temperature is obtained at
discharge point
(clockwise = decrease temperature, anticlockwise = increase
temperature)
.
When resistance is felt do not use force to turn any further, as this will
damage the internal parts.
4.
Once the desired maximum blend temperature is achieved, refit the hub without
disturbing the spindle, positioning it so that the centre stop slot in the hub fits
over the top of the cartridge stop (refer to
Figure 2
), preventing further rotation.
Check that blend temperature has not altered.
5.
Refit the temperature knob. Make sure that the indicator points to 6 o'clock.
Temperature Knob
Hub
Screw
3 mm Hexagon
Wrench
Spindle
Cartridge Stop
Centre Stop Slot
Centre Stop Position
Hub Stop
Hub Stop Position
Hub Stop
Inner Face
Outer Face
Increase
Temperature
Decrease
Temperature
Indicator
Concealing
Cap
