Warnings, Precautions Using the RS-2000
Radiation Exposure
As previously discussed, radiation exposure should be minimal unless the unit
itself is compromised. Examples of unsafe conditions which could result in
potentially dangerous radiation levels include;
- Door interlock to the RS-2000 does not work
- Shielding has been damaged
- Evidence of machine tampering
Other Precautions
- Another serious hazard from an x-ray device is electrical shock. The x-ray
generator is a highly regulated DC power supply that applies a voltage of
160 kilovolts.
- No unauthorized personnel may defeat or override any safety features on
the x-ray generator, collimator, or shielding, without permission of the
manufacturer (Rad Source). The RS-2000 is to be serviced by trained
personnel only.
- Please keep unit dry. When cleaning do not allow cleaners or water to drip
into panels or chamber. Use only a damp cloth with mild soaps for cleaning.
- Do not use the top of the unit as a storage area. Do not place any heavy
items or items containing liquids or materials that may harm the unit if they
leaked or spilled on top or inside.
-
The x-ray tube can be damaged if power is shut off
immediately following an irradiation. After the
irradiation is completed, wait 5 minutes before
turning the unit off.
Turn power off
