Rad Power Bikes RadRhino, Owner'S Manual

Page: 7 / 33

7
Be sure to center the handlebar and ensure hardware is properly secured.
Step 3:
Install front wheel. For detailed instructions please view the Quick Release Installation video found at
https://www.radpowerbikes.com/pages/help
Step 4:
Install the pedals. Use the pedal marked with an “L” on the left side and the right pedal marked with an “R” on the right
side (side with drivetrain gears). Be careful to not cross thread the pedals. Tighten securely as shown in the assembly video.
Step 5:
Inflate tires to desired PSI. Recommended pressure 20 PSI (1.379 Bar). Do not overinflate or underinflate tires.
Step 6:
Set desired saddle height. Secure tightly with the quick release lever at the desired height. Ensure saddle post is not
extended beyond the minimum insertion marking near the base of the saddle post.
Step 7:
Check that the battery pack is locked to the frame of the RadRhino.