Rad Power Bikes RadRhino, Owner'S Manual

Page: 12 / 33

12
o
Charge in a clear area away from potential to trip on the charging cords, or damage to occur to the bike, battery or
charging equipment while parked.
When the Battery Is Removed
o
Do not touch the “+” and “ - “ terminal contacts on the bottom of the battery when the battery is removed from the bike.
o
Be careful not to drop or damage the battery pack when loose from the bike.
o
Ensure the battery is turned off whenever it is being removed or off the bike.
When Installing the Battery onto the Bike
o
Ensure the battery is turned off before sliding the battery into the frame mount receptacle.
o
Do not force the battery onto the receptacle, slowly align and push battery down into the receptacle.
o
Ensure the key is in the locked position before riding and check that the battery has been properly secured to the bike
before each use by pulling upwards and testing the security of the pack.
Charging Time
When the input and output terminal are connected properly, and the battery is not fully charged, the red charging indicator light
should illuminate, showing that the battery is charging. The time that the battery takes to fully charge the battery is dependent
on various factors including distance traveled, riding characteristics, terrain, payload, and battery age. The following table
provides an estimate of charge time based on most common distances traveled in regular operation:
Distance Traveled Charge Time to Fully Recharge
8 km 1 hour
16 km 1.5 hours
24 km 2.5 hours
32 km 3.5 hours
40 km 4.5 hours
48 km 5.5 hours