Rad Power Bikes RadRhino, Owner'S Manual

Page: 22 / 33

22
3. Steering
o
Ensure handlebar and stem are correctly adjusted and tightened, and
allow proper steering.
o
Ensure the handlebar is set correctly in relation to the forks and the
direction of travel.
4. Chain
o
Ensure the chain is oiled, clean and runs smoothly.
o
Extra care is required in wet or dusty conditions
5. Bearings
o
Ensure all bearings are lubricated, run freely and display no excess
movement, grinding or rattling.
o
Check headset, wheel bearings, pedal bearings and bottom bracket
bearings.
6. Cranks and Pedals
o
Ensure pedals are securely tightened to the cranks.
o
Ensure the cranks are securely tightened and are not bent.
7. Derailleurs
o
Check that the derailleur(s) are adjusted and functioning properly.
o
Ensure shift and brake levers are attached to the handlebar securely.
o
Ensure all brake and shift cables are properly lubricated.
8. Frame and Fork
o
Check that the frame and fork are not bent or broken.
o
If either are bent or broken, they should be replaced.
9. Accessories
o
Ensure all reflectors are properly fitted and not obscured.
o
Ensure all other fitting on the bike are properly secured and functioning.
o
Ensure rider is wearing helmet and other required riding safety gear.
10. Motor Drive Assembly and Throttle
o
Ensure hub motor is spinning smoothly and the motor bearings are in
good working order.
o
Ensure all power cables running to hub motor are secured and
undamaged.
o
Make sure the hub motor axle bolts are secured and all torque arms and
torque washers are in place.
11. Battery Pack
o
Ensure battery is charged before use.
o
Ensure there is no damage to battery pack.
o
Lock battery to frame and check to see that it is secured.
12. Fenders
o
Ensure fender mounting hardware is properly secured.
o
Ensure there are no cracks or holes in fenders.
13. Rear Rack
o
Ensure mounting hardware is properly secured.
o
Ensure taillight and taillight power wire are properly secured.