RACOM RipEX 1.6.0, User Manual

Page: 91 / 171

○ Start Time [HH:MM:SS]
Fill in the Time in the required format when Auto Toggle mode starts on ”Start Date“ day.
○ Period [min.]
Minimum value 60 min.
Within this period units “A” and “B” will change their activities over. Unit “A” starts to operate at
“Start Date and Time”. When “Period” minus “Unit B” time expires, controller switches to unit
“B”.
○ Unit B [min.]
Minimum value 5 min.
Time when unit “B” will be active within “Period”. It has to be shorter than Period by 5 min.
Time
List box: Manual, NTP
Default = Manual
Internal calendar time of RipEX can be set manually or synchronized via NTP (Network Time Protocol).
• Manual
RipEX internally uses the Unix epoch time (or Unix time or POSIX time) - the number of seconds
that have elapsed since January 1, 1970. When RipEX calendar time is set, the Unix epoch time
is calculated based on filled in values (Date, Time) and the time zone, which is set in operating
system (computer), where the browser runs.
○
Current Date&Time
Information about the actual date and time in the RipEX
○ Date [YYYY-MM-DD]
Fill in Local Date in required format
○ Time [HH:MM:SS]
Fill in Local Time in required format
○ RipEX Time zone
Select RIPEX Time zone from list box.
Default = (GMT +1:00) Central Europe
This time zone is used for conversion of internal Unix epoch time to "human readable date&time"
in RipEX logs.
○ Daylight saving
List box: On, Off
Default = On
If
On , Daylight saving is activated according the respective rules for selected RipEX Time zone.
• NTP
Internal calendar time in RipEX is synchronized via NTP and RipEX also acts as a standard NTP
server simultaneously.
○
Current Date&Time
Information about the actual date and time in RipEX
○ Time source
List box: NTP server, Internal GPS
Default = NTP server
■
NTP server – The source of time is a standard NTP server. This server can be connected
either via the Ethernet interface or over the Radio channel (any RipEX runs automatically as
a NTP server).
91 © RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration