RACOM RipEX 1.12.0, User Manual, Page: 53 / 189

Enviromental
IP40 IP Code (Ingress Protection)
> 500.000 hours (> 50 years) MTBF (Mean Time Between Failure)
−40 to +70 °C (−40 to +158 °F) Operating temperature
5 to 95 % non-condensing Operating humidity
−40 to +85 °C (−40 to +185 °F) / 5 to 95 % non-condensing Storage
Mechanical
Rugged die-cast aluminium Casing
50 H × 150 W × 118 mm D (1.97× 5.9 × 4.65 in) Dimensions
1.1 kg (2.4 lbs) Weight
DIN rail, L-bracket, Flat-bracket, 19" Rack shelf Mounting
SW
Bridge / Router Operating modes
Modbus, IEC101, DNP3, UNI, Comli, DF1, RP570, Profibus, … User protocols on COM
Modbus TCP, IEC104, DNP3 TCP, Comli TCP, Terminal server… User protocols on Ethernet
Modbus RTU / Modbus TCP, DNP3 / DNP3 TCP Serial to IP convertors
Protocol on Radio channel
Yes Multi master applications
Yes Report by exception
Yes Collision Avoidance Capability
Yes Remote to Remote communication
Yes
Addressed & acknowledged serial
SCADA protocols
CRC 32 Data integrity control
AES256 Encryption
up to 3× higher throughput Optimization
Diagnostic and Management
Yes (ping with RSS, Data Quality, Homogenity) Radio link testing
Device – Ucc, Temp, PWR, VSWR, *HW Alarm Input.
Radio channel – *RSScom, *DQcom, TXLost[%]
User interfaces – ETH[Rx/Tx], COM1[Rx/Tx], COM2[Rx/Tx]
* not broadcast
Watched values (Can be broadcast
to neighbouring units. Received info
displayed in Neighbours table)
For Rx/Tx Packets on User interfaces (ETH, COM1, COM2) and
for User data and Radio protocol (Repeates, Lost, ACK etc.) on
Radio channel
Statistics
For Watched values and Statistics Graphs
20 periods (configurable, e.g. days) History (Statistics, Neighbours,
Graphs)
SNMPv1, SNMPv2c
Trap alarms generation as per settings
SNMP
Real time/Save to file analysis of all physical interfaces (RADIO,
ETH, COM1, COM2) and some internal interfaces between
Monitoring
53 © RACOM s.r.o. – RipEX Radio modem & Router
Product