RACOM RipEX 1.12.0, User Manual, Page: 127 / 189

Modbus
Modbus RTU is a serial polling-type communication protocol used by Master-Slave application.
When RipEX radio network run in Router mode, more Modbus Masters can be used within one Radio
network and one Slave can be polled by more Masters.
Modbus protocol configuration uses all parameters described in
Common parameters .
Mode of Connected device
Master
Broadcast
Address translation
Table
Mask
Slave
Broadcast accept
Profibus
RipEX supports Profibus DP (Process Field Bus, Decentralized Periphery) the widest-spread version
of Profibus. The Profibus protocol configuration uses all parameters described in
Common parameters.
Mode of Connected device
Master
Broadcast
Address translation
Table
Mask
Slave
Broadcast accept
RP570
RP570 is a serial polling-type communication protocol used in Master-Slave applications.
When a RipEX radio network runs in the Router mode, multiple RP570 Masters can be used within
one Radio network and one Slave can be polled by more than one Master.
Underlined parameters are described in Common parameters .
Mode of Connected
device
Master
• Local simulation RB
List box: Off, On
Default = Off
127 © RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration