manualshive.com logo in svg

RACOM RipEX 1.12.0, User Manual, Page: 171 / 189

Share
Download
RACOM RipEX 1.12.0 User Manual Download Page 171

Declaration of Conformity – RipEX

www.racom.eu

We

declare under our own responsibility that the product

Manufacturer:

RACOM

Address:

Mirova 1283, 592 31 Nove Mesto na Morave, Czech Republic

VAT:

CZ46343423

RACOM s.r.o.

• Mirova 1283 • 592 31 Nove Mesto na Morave • Czech Republic

Tel.: +420 565 659 511 • Fax: +420 565 659 512 • E-mail: [email protected]

1355

The above named equipment is classified as a Class 2 radio equipment and it is marked with Equipment Class
Identifier      in accordance with Commission Decision 2000/299/EC.

The product is in conformity with the following standards and/or other normative documents:

Spectrum (art 3.2)

EN 300 113–2 V1.5.1

EN 302 561 V 1.3.2

EMC (art 3.1.b)

EN 301 489–1 V1.9.2

EN 301 489–5 V1.3.1

Safety (art 3.1.a)

EN 60950–1:2006, A11:2009, A1:2010, A12:2011

EN 50383:2010

Notified Body Opinion:

According to:

European Union Directive 1999/5/EC – ANNEX IV

Document No.:

00006/171/5/2014
00007/171/5/2014
00008/171/5/2014

Issued by:

Vyskumny ustav spojov Banska Bystrica, Slovakia

Notified Body:

No. 1355

Nove Mesto na Morave, 25 of February 2015

Jiri Hruska, CEO

th

Product:

RipEX-160

Purpose of use:

Radio modem & Router

to which this declaration relates is in conformity with the essential requirements and other relevant
requirements of the Directive of the European Parliament and of the Council 1999/5/EC on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity.

RipEX-300

RipEX-400

ver. 1.1

Fig. 10.1: Declaration of Conformity RipEX

171

© RACOM s.r.o. – RipEX Radio modem & Router

Safety, environment, licensing

Summary of Contents for RipEX 1.12.0






























































































































































































Reviews:

No comments