ComboXCAT-IP User Guide
25
Rackit Technology Corporation – www.rackittechnology.com – 1-800-636-3434
traffic even if display content is not really changing (depending on the quality of the
video input signal). All in all the default setting should be suitable for most situations.
Video Settings through the Remote Console
Figure 4-7 Video Settings Panel
Brightness
Controls the brightness of the picture
Contrast
Controls the contrast of the picture
Clock
Defines the horizontal frequency for a video line and depends on the video
mode. Different video card types may require different values here. The default
settings in conjuction with the auto adjustment procedure should be adequate for all
common configurations. If the picture quality is still bad after auto adjustment you may
try to change this setting together with the sampling phase to achieve a better quality.
Phase
Defines the phase for video sampling, used to control the display quality
together with the setting for sampling clock.
Horizontal Position
Use the left and right buttons to move the picture in horizontal
direction while this option is selected.
Vertical Position
Use the left and right buttons to move the picture in vertical
direction while this option is selected.
Reset this Mode
Reset mode specific settings (Clock , Phase and Position) to the
factory-made defaults.
