ComboXCAT-IP User Guide
42
Rackit Technology Corporation – www.rackittechnology.com – 1-800-636-3434
The output image extension file name has to be 'iso', e.g.
CD-Rom_vir.iso.
You may create an ISO image size up to 650Mb. This drive would be in
read-only mode and would not allow you to write any information on this
drive but copying only. This drive would be bootable under DOS mode if
the motherboard/BIOS on the host computer supports USB BOOTABLE
function. For emulating DVD Drive, please use
Drive Redirection
function.
The above information has to be given from the point of view of
ComboXCAT-IP with correct IP address and device name.
Administrative permission is required as regular user may not have the
right to access. Please login as a system administrator (or as "root" on
UNIX systems).
The following information has to be given to mount the image properly:
Share Host --
The server name or its IP address.
Share Folder Name --
The name of the share folder to be used.
Image File Name --
The name of the image file on the share folder.
User Name --
If necessary, specify the user name for the share named in advance. If
unspecified, and a guest account is activated, this guest account information will be
used as your login.
Password --
If necessary, specify the password for the given user name.
To register the specified file image and its location click on the button "Set".
The specified image file is supposed to be accessible from ComboXCAT-IP. The
information above has to be given from the point of view of ComboXCAT-IP. It is
important to specify correct IP addresses, and device names. Otherwise,
ComboXCAT-IP may not be able to access the referenced image file.
Furthermore, the specified share has to be configured correctly. Therefore,
administrative permissions are required. As a regular user you may not have these
permissions. You should either login as a system administrator (or as "root" on UNIX
systems), or ask your system administrator for help to complete this task.
