- 12 -
5. OPERATION
a. Before starting
-
Be sure that you have correctly completed the installation.
-
Inspect the work area. Make sure there are no obstacles or dangerous debris
that could damage the tool.
b. Start/stop the machine
.
NOTE: Starting the product differs depending on whether the engine is cold
or warm.
1. Move the ON/OFF switch to the ON position (I).
2. Move the throttle control to the idle position
3. Move the choke lever upwards to the start position (cold start).
Note. This is not required if the engine is already warm.
4. Push the primer button 8 times, until the petrol/oil mixture flows in and out of
the discharge hose located above the fuel tank.
5. Pull the recoil starter 2-3 times until you hear the engine starting.
O
N
O
F
F
