background image

ORIGINAL INSTRUCTIONS

- 3 -

1. SAFETY INSTRUCTIONS

WARNING: For your own safety, please read this manual before attempting to

operate your new unit. Failure to follow instructions can result in serious

personal injury. Spend a few moments to familiarize yourself with your blower

before each use. If you give this tool to another person, also hand over this

manual.

Use this tool as described in this manual. Any mishandling and any use

contrary to the instructions will not in any way engage the liability of the

manufacturer.

Non-compliance with safety instructions and use can cause a risk of electric

shock, fire and /or injury to persons.

READ YOUR USER MANUAL THOROUGHLY BEFORE OPERATING YOUR UNIT.

Never allow children, handicapped or inexperienced people to use the machine.

Local regulations may restrict the age of the user.

Keep children, bystanders and animals away from the machine when using it (at

least 15 meters).

Remember that the user is responsible for accidents or damage to people or their

property.

Never dismantle the machine by yourself. Any disassembly or repair must be

carried out by qualified personnel.

Always wear personal protective equipment (PPE)

Wear long, thick pants, boots, eye protection and safety gloves. Do not wear

loose clothing, shorts or jewellery, and never work barefoot.

To reduce the risk of injury, never wear loose clothing, scarf, collar, chain, etc. as

they could get caught in moving parts. If you have long hair, be sure to tie it above

shoulder level to prevent it from getting caught in the moving parts.

The machine is extremely noisy and requires the use of good quality hearing

protection every time you use it.

Carry the machine only by its handle. Never try to wear it in other places.

Refuel only in safe places. Open the tank slowly to release any pressure that may

have built up in the tank. Clean any gasoline or spills from the machine before

using it. To prevent any risk of fire, move at least 10 meters away from the

refueling area before starting the machine.

Switch off the machine before any preparation, installation or maintenance.

All machine screws should be properly seated and tightened securely. The

machine must be in good working order. Never use this machine if it is not

assembled correctly.

Keep handles clean and dry and free from gasoline or oil.

Always store the machine in a clean and dry place away from all electrical

equipment.

Never start the engine in a closed or poorly ventilated room as the exhaust gases

can be fatal.

Only operate the machine at reasonable times - not too early in the morning or

late at night, when people may be disturbed.

Never use the machine in bad weather or if there is a risk of lightning or

thunderstorms. Do not use in the rain or in wet areas.

Do not use this machine if you are tired, sick, under the influence of alcohol or

drugs, or if you are taking medication.

Do not use this machine in a poorly lit area.

Summary of Contents for RAC26PBL




















Reviews: