Install & Align Universal Pedal Plate
Hardware:
● 1 x Steel Universal Pedal Plate
● 4 x 20mm
LONG
Bolts
● 4 x M8 Flange Nuts
Pass 4 x 20mm LONG Bolts through the pedal plate and mounting gussets from the top.
Secure with M8 Flange Nuts on the bottom side.
You may need to loosen the back rail (with logo), and push side rails in or out slightly to
get everything aligned correctly.
This is normal. Just remember to tighten everything back up
when you’re done.
There are many different Pedal Plate mounting options for different heights, distances,
and angles.
You can mount into any slot at any height. You can and should get creative to get
the position perfect for you.
Page 34
RCP Cockpit PRO Manual (v.02/2024.1)
