Option C:
Front Mount
Hardware:
● 1 x Bottom Mounted Wheelbase (Logitech etc purchased separately)
● 4 x 20mm LONG Bolts
● 4 x M8 Flange Nuts
● 4 x Silver M6 Bolts (from accessory mounting bag)
1. Install the Front Mount using the 20mm LONG Bolts and M8 Flange Nuts
2. Finally fully tighten the 8 x 16mm Standard Bolts that hold the side mounts onto
the extrusions.
3. Install your wheelbase onto the Front Mount using 4 of the included M6 bolts
(depending on your exact wheel base you may need different size bolts)
Pro Tip:
Install one bolt loosely into the wheelbase on its own, then lift the entire
assembly into place, slide the bolt into the corresponding slot, and tighten onto the front
mount.
This allows you to position the wheelbase in the right spot, tighten the single bolt, and
then be free to mount the other 3 bolts into the wheelbase without having to hold it.
Page 26
RCP Cockpit PRO Manual (v.02/2024.1)