Step SR1:
Install Rubber Feet To Plates
Hardware:
● 4 x Steel Sim Riser Plates
● 4 x Riser Studs with Rubber Feet
● 8 x M8 Flange Nuts
Use the M8 Flange nuts to secure the rubber feet to the Sim Riser Plates.
Make 2 right hand side
Make 2 left hand side (flip plate over)
If you only have 4 Flange nuts use them on the bottom sides of each, and regular m8 nuts on
top.
Page 11
RCP Cockpit PRO Manual (v.02/2024.1)
