910161
Hydraulic Rail Drill
Phone: (262) 637-9681
Email:
1.2023 Rev 3.1
Original Instructions
Page 5
Section 1: Overview and Safety
Hydraulic Rail Drill Overview
RRP designs and manufactures equipment primarily for the repair and new construction of rail and
railroad tie track maintenance.
Hydraulic Rail Drill is a low pressure hydraulic rail drill MAG Series (Machined Aluminum, Gerotor)
designed for drilling holes and fastening hardware.
The drill balances well in a gloved hand while the handle, grip and trigger have been ergonomically
designed for ease of operation. The drill incorporates proven gerotor motor for long life and greater
efficiency over gear type motors.
Do not
use this machine for other than its intended purpose.
Please read these instructions when using this tool, which can only be used for the specified purpose.
This instruction manual should be kept throughout the life of the tool.
The operator of this tool should:
•
Have access to this operation instruction.
•
Read and understand this operation instruction.
Environmental Protection
Comply with relevant national waste disposal laws and regulations. Waste electronic
devices cannot be treated as household waste.
Equipment, accessories, and packaging shall be recyclable.
Don't throw the discarded equipment in trash cans.
Safety Information
For safe installation and operation of this equipment, carefully read and understand the contents of this
manual. Improper operation, handling, or maintenance can result in equipment damage and personal
injury.
Only trained and authorized personnel should be allowed to operate this machine. In addition, all
personnel at the worksite should be aware of the safety concerns and their individual responsibilities prior
to working this machine.
Please read and comply with all the safety precautions in this manual
before
operating this machine.
Your safety is at risk.
