910161
Hydraulic Rail Drill
Phone: (262) 637-9681
Email:
1.2023 Rev 3.1
Original Instructions
Page 7
Always
shut disconnect the drill from the power source and make sure that all controls are in a safe
position and install all appropriate locking and safety devices before doing any of the following:
•
Lubricating
•
Adjusting
•
Installing Tooling
•
Making Repairs
•
Performing Service
Tools are not insulated for use on or near energized conductors
. Use of
these tools near energized conductors may lead to electrical shock, causing
severe injury or death.
Do not use these tools near energized conductors without adequately insulating
operator and surroundings.
Tool parts rotate at high speeds and can cause severe personal injury. Keep
all
body parts away from moving parts of the tool when connected to a hydraulic
power source or during operation.
Operator must clear all bystanders from the work area when handling, starting,
and operating a tool to avoid injury to bystanders.
Do not over-reach while using a tool
. Loss of balance can cause serious
personal injury or death. Move closer to work area and securely support yourself
and your work.
Always keep proper footing and balance
.
Hydraulic fluid is under pressure.
Always depressurize the hydraulic system before connecting or disconnecting a
tool to avoid serious injury from escaping fluid. If injury results from escaping
hydraulic fluid, seek immediate medical attention to avoid serious bodily injury.
Hot hydraulic fluid.
Exposure to hot hydraulic fluid can cause severe burns. Do NOT connect or
disconnect a tool while the hydraulic power source is running and/or the
hydraulic fluid is hot.
Never lock a tool trigger in the power ON position
. A tool locked ON can lead
to serious injury or death