VBOX 3iSL User Guide
Page 10 of 49
01/12/2011
Roll Mode
The VB3i SL allows the user to separately test roll and pitch measurements during their testing. By default, the VB3i SL will be setup for pitch determination. If the
user wishes to setup their antennas across the width of the car to measure roll angle, then the Roll Mode option must be toggled in the Dual Antenna menu. Click
this option to toggle between Pitch Mode (no-tick), and Roll Mode (tick).
Swap Antennas
When swap antennas is enabled (ticked), this allows the primary antenna A, to be mounted ahead of secondary antenna B (pitch configuration only), by configuring
a 180° offset to the slip channel. Scrolling to this option and clicking the rotary knob will toggle between on/off.
