Front Panel
1. Press the '
OK
' button to enter the menu, navigate to '
IMU
' using the '
Down
' arrow and then press the '
OK
' button.
2. Navigate to '
Wheel Speed Input
' using the '
Up
' and '
Down
' arrows. It will display whichever mode has been
previously set.
3. To change the setting, press the '
OK
' button and then press the '
OK
' button again to confirm.
4. '
Disabled
' will then be displayed.
Dynamic Mode
The dynamic mode should be set as '
High
', this can be done via the
, the
of the unit
or using the
. More information on Dynamic Modes is available
VBOX Setup Software
1. Ensure VB3iS is powered.
2. Connect VB3iS to a computer using the supplied loom, connect an RLCAB001 cable to the '
CONFIG
' lead and
connect the serial plug to the computers serial port – this can be done via a serial > USB convertor if required.
3. Open
VBOX Setup
and connect to VB3iS by selecting the correct
COM Port
.
4. Select the '
GNSS
' menu and then the '
Settings
' tab.
https://en.racelogic.support//Product_Info/Sensors/VBOX_3iS/Knowledge_Base/Using_VB3iS_for_Brake_Stop_Testing
6
