MUST all be different.
In Timed Mode the channel data will be sent at intervals with the corresponding Response Identifier – the Request
Identifiers have no effect.
When using Standard Identifiers the maximum value for the identifiers is $7FF. Entering a value higher than this may
result in unexpected results.
Setup Parameters Table
Parameter
Options
Comments
Racelogic Polled mode
VBOX compatible mode.
In this mode no other parameter has
any effect.
User Polled mode
Baud Rate must be set.
Extended Identifiers must be set.
Request Identifiers must be set.
Response Identifiers must be set.
CAN Mode
Timed mode
Timer must be set.
Baud Rate must be set.
Extended Identifiers must be set.
Response Identifiers must be set.
Timer [ms]
(message interval in ms)
Minimum value is 10 (100 Hz) –
below this value data may be
erroneous.
If the Timer value is set to 0 ms and
Timed CAN Mode is on then Timer
value will be changed to 1 ms.
Baud Rate [kbit/s]
1000 kbit/s
If a Baud Rate value other than
those specified is entered it will be
Powered by
https://racelogic.support/
01VBOX_Automotive/
04Modules_and_accessories/
Mini_Input_Module/
27
