When a MIM01 is connected to a VBOX other than the VBOX Mini, the input channels are configured through VBOX
setup in VBOX Tools. With the MIM01 connected to the VBOX via the CAB05-C cable, ensure that the VBOX is
powered and connected to the PC serial port. Click
VBOX Setup
on the main menu bar. When the VBOX setup window
appears, an
Input modules
tab should be present on the Channels page.
Click the
Input Modules
tab to bring the tabbed page into view. The serial number and firmware version of the module
is displayed in the
Input Module
tab, below that are the Channel Buttons for each of the available inputs along with
check boxes for enabling individual channels for logging and inclusion in the serial data stream.
Configuring an input channel
To configure a channel, click the corresponding channel button. A channel setup window will appear showing the current
settings.
The Channel Name and Units can be changed for each of the input channels and a scale and offset can also be applied
to selected input channels. On the Digital input channels there are further options to optimise the input.
Powered by
https://racelogic.support/
01VBOX_Automotive/
04Modules_and_accessories/
Mini_Input_Module/
13
