CAN ID
First 4 Data Bytes
Last 4 Data Bytes
CAN ID set for Channel 7
Channel 7 Data
Channel 8 Data
Channels
Each input channel has a drop down associated for configuring channel specific attributes.
Digital input channels include an 'edge detection' option. This determines whether the frequency is measured from the
RISING or FALLING edge of the signal.
The Digital input channels 1 & 2 also include a Mode option. Please see the section
‘Digital inputs’
for more details.
Scale and Offset
For more information on calculating scale and offset,
Click Here
.
Request and Response Identifiers
The Request Identifiers only have an effect in User Polled CAN Mode. If a CAN message is received by the MIM01 that
matches a Request Identifier then the MIM01 will respond by sending the corresponding channel data on the
corresponding Response Identifier.
Note: All channels can be set to the same Request Identifier, if desired – this means
that on receipt of a single CAN message the MIM01 will respond with all channels of data. The Response Identifiers
Powered by
https://racelogic.support/
01VBOX_Automotive/
04Modules_and_accessories/
Mini_Input_Module/
26
