Racelogic MFD Touch Manual Download Page 140

Page: 140 / 140

MFD Touch - Updating the Firmware

Occasionally Racelogic will release new versions of firmware (internal code) for the MFD Touch, often to introduce new
features.

New firmware is loaded into the MFD Touch using an SD card.

How to Update the MFD Touch Firmware

1. Download the latest update file from the

VBOX Automotive Website

(Your unit must be registered to receive the required login details for the download. Register

here

)

2. Unzip the folder and place the

.rvf

file on to the root directory of the SD card (not in the media or any other folder).

3. Insert the SD card into the

side panel of the unpowered unit

4. Connect to the VBOX unit.

5. Confirm the update by pressing

6. The unit will then display an update screen with a progress bar.

7. Once complete, the unit will restart.

Note: Once the firmware is successfully loaded onto the unit, the file will be removed from the SD card.

https://en.racelogic.support//Product_Info/Displays/MFD_Touch/MFD_Touch_Updates/MFD_Touch_-_Updating_the_Firmware

140

Summary of Contents for MFD Touch













































































































































Search results

Summary of Contents for MFD Touch

Reviews:

Related manuals for MFD Touch

Brands by name

Popular brands

Racelogic MFD Touch, Manual

Search results

Summary of Contents for MFD Touch

Reviews:

Related manuals for MFD Touch

Brands by name

Popular brands