Race RC Velocity 800 BL, Instruction Manual

Page: 11 / 16

11
Motor Care
•
frequent starts, stops, turns or pushing items in
the water can overheat the motor. Other driving
also cause excessive heat and damage the motor.
possible.
• Though the E SC is equipped with overheat
When Finished Running
•
•
•
TIP : Alwa y s store the boa t open – with the h atch
removed, so that the inside of the boat is allowed
to complet ely d r y. E xcessive moisture allowed to
remain in the hull can all mold or mildew to grow and
damage the components.
Set Screw
Coupling
NOTICE
:
Running the boat in salt water could
cause some parts to corrode. If you run the
boat in salt water, make sure it is rinsed
lubricate the drive system. Because of the
will void the boat’s warranty.
Boat Maintenance
shows visible wear. Running the boat with a damaged
warrant y , but could also cause personal injur y or
pr operty dama ge.
the drivetrain. The lubricant also acts as a water seal,
keeping water from entering the hull through the
show excessive wear or damage.
1.
2.
TIP
:
is being removed.
3.
4.
up to the drive dog using marine grease.
5. Apply th read lock to the coupling setscrew.
loosening during use.
6.
ensuring that there is a 1 to 2 mm gap
between the prop strut and the drive dog to
Marine Grease
Coupling
Set Screw