Racal Instruments AN/TRC-207, Operation And Maintenance Instructions, Page: 71 / 102

TO 31R2-2TRC207-1
7-3
AN931-4-13 B2 16.W2
A2460 S/1 16W060
A317 1140 32P010.1
A32 121873 32P0101
b. Figure and Index Number Column. For each part number, the figure or figure and index number refers
to the MPL where the parts relationship is shown. When an assembly or part has not been assigned an
index number, the figure and index number of the preceding part in the MPL is used with the letter "F"
before the figure, such as F7-7. The letter "F" denotes "follows".
7-4 REFERENCE DESIGNATION INDEX
The Reference Designation Index (Chapter 7, Section IV) is listed by figure as it appears in the MPL, then in alphabetical-
numerical order, the reference designations used in schematic diagrams and instruction books. Opposite the reference
designation is listed the figure index number as shown in the MPL.
7-5 ELECTROSTATIC DISCHARGE (ESD) SENSITIVE DEVICES .
a. This technical order contains parts and assemblies sensitive to damage by ESD. T.O. 00-25-234 should
be consulted for specific information on how damage can occur to electronic parts, assemblies, and
equipment by ESD and the control measures to be taken to protect against such damage.
b. Illustrations contained within this manual which depict ESD parts are further identified by the use of
the following symbol affixed in the lower right-hand corner of each applicable illustration.
c. The MPL contained within this manual with ESD sensitive parts are identified by the following symbol
(ESD). These symbols are placed in the extreme right of the description column for the item as ESD
sensitive.