Racal Instruments 1266, Manual

Page: 24 / 64

2-6 Installing Mainframe Options Chapter 2
Set Up Rack Cabinet
Remove Rack Slide Chassis Sections (Figure 2-6)
1 Open the Option 01, Rack Slide Kit (407870-009).
2 Remove the Left-Side (LH) Rack Slide Chassis Section from the
Intermediate Section.
3 Slide the Intermediate Section back into the Stationary Section.
4 Remove the Right-Side (RH) Rack Slide Chassis Section from the
Intermediate Section.
5 Slide the Intermediate Section back into the Stationary Section.
NOTE Be sure to mark the chassis sections as RH or LH so you can install them
on the proper side of the Rack Mount Adapters. (The Rack Slide is marked
with - RH or - LH on the label to identify it.)
Figure 2-4. Removing Rack Slide Chassis Section
(Right Rack Slide Shown)
Stationary
Section
Rack
Rear
Rack
Front
Intermediate
Section
Section
Chassis
Depress to
Remove Chassis
Section