background image

1260-145 User Manual 

Racal Instruments 

 2003 

 

Module Operation 3-17 

 

1260-145 Example 
Code 

 

#include <visa.h> 
 
/* This example shows a 1260-01T at logical address 16 and a VXI/MXI */ 
/* interface */ 
#define RI1260_01_DESC 

"VXI::16" 

 
/* For a GPIB-VXI interface, and a logical address of 77 */ 
/* the descriptor would be:  "GPIB-VXI::77" */ 
 
 
/* this example shows a 1260-145 with module address 7, control register 

1, and write data of 0xAA */ 
#define MOD_ADDR_145  7 
#define CONTROL_REGISTER 

#define 

DATA_ITEM 0xAA 

   

 
 
void example_operate_1260_145(void) 

 ViUInt8 

creg_val; 

 

ViBusAddress chan1_addr, offset; 

 

ViSession hdl1260; 

/* VISA handle to the 1260-01T */ 

 ViSession 

hdlRM; 

 

/* VISA handle to the resource manager */ 

 

ViStatus error;   

/* VISA error code */ 

 

 

 

/* open the resource manager */ 

 

/* this must be done once in application program */ 

 

error = viOpenDefaultRM (&hdlRM); 

 

 

 

if (error < 0) { 

 

 

/* error handling code goes here */ 

 } 
 

 

 

/* get a handle for the 1260-01T */ 

 

error = viOpen (hdlRM, RI1260_01_DESC, VI_NULL,VI_NULL, &hdl1260); 

 

if (error < 0) { 

 

 

/* error handling code goes here */ 

 } 
 

 

 
 

/* form the offset for control register 0 */ 

 

/* note that the base A24 Address for the 1260-01T */ 

 

/* is already accounted for by VISA calls viIn8() and */ 

Summary of Contents for 1260 VXI
































































Reviews: