background image

 

THANK YOU FOR PURCHASING THIS RACAL INSTRUMENTS PRODUCT. 

For this product, or any other Racal Instruments product that incorporates software drivers, you 
may access our web site to verify and/or download the latest driver versions. The web address for 
driver downloads is: 

                                                  

http://www.racalinstruments.com/downloads

 

You will be asked to register one time only to gain access to the driver and product manual 
downloads sections. At registration a cookie will be placed on your computer if you choose to 
accept it. This is done to facilitate your use of these sections on future visits. You may refuse to 
accept the cookie and still have complete access to the software driver database but will have to re-
register every time you visit. This cookie is for ease of use only and no information is gathered for, 
sold, or reported to, any third party organization. 

If you have any questions about software driver downloads or our privacy policy, please contact us at  
                                                               

[email protected]

 

WARRANTY STATEMENT 

All Racal Instruments, Inc. products are designed and manufactured to exacting standards and in full 
conformance to Racal’s ISO 9001 procedures. 

This warranty does not apply to defects resulting from any modification(s) of any product or part without 
Racal’s express written consent, or misuse of any product or part. The warranty also does not apply to fuses, 
software, non-rechargeable batteries, damage from battery leakage, or problems arising from normal wear, 
such as mechanical relay life, or failure to follow instructions. 

This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty of 
merchantability or fitness for a particular use. The remedies provided herein are buyer’s sole and exclusive 
remedies. 

For the specific terms of your standard warranty, or optional extended warranty or service agreement, contact 
your Racal customer service advisor. Please have the following information available to facilitate service.  

1.  Product serial number 

2.  Product model number 

3.  Your company and contact information 

You may contact your customer service advisor by: 

E-Mail:  

 

 

[email protected]

 

Telephone: 

 

+1 800 722 3262 

 

(USA) 

  +44(0) 

8706 

080134 

 (UK) 

  +852 

2405 

5500  (Hong 

Kong) 

Fax:   

 

+1 949 859 7309 

 

(USA) 

  +44(0) 

1628 

662017 

 (UK) 

  +852 

2416 

4335 

 (Hong 

Kong) 

 

Summary of Contents for 1260 VXI
































































Reviews: