User’s Manual
2
The RCM4510W receives its +3.3 V power from the customer-supplied motherboard on which it
is mounted. The RCM4510W can interface with all kinds of CMOS-compatible digital devices
through the motherboard.
1.1 RCM4510W Features
•
Small size: 1.84" × 2.85" × 0.54"
(47 mm × 72 mm × 14 mm)
•
Microprocessor: Rabbit 4000 running at 29.49 MHz
•
Up to 40 general-purpose I/O lines configurable with up to four alternate functions
•
Up to 9 additional general-purpose I/O lines (up to four of which may be set up as analog
inputs) available through the XBee RF module
•
3.3 V I/O lines with low-power modes down to 2 kHz
•
Six CMOS-compatible serial ports — four ports are configurable as a clocked serial port (SPI),
and two ports are configurable as SDLC/HDLC serial ports.
•
Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with parallel I/
O lines)
•
512K flash memory, 512K data SRAM
•
Real-time clock
•
Watchdog supervisor
Currently there is one production model with a choice of XBee firmware. Table 1 summarizes its
main features.
Table 1. RCM4510W Features
Feature
RCM4510W
Microprocessor
Rabbit
®
4000 at 29.49 MHz
Flash Memory
512K
Data SRAM
512K
Serial Ports
6 shared high-speed, CMOS-compatible ports:
6 are configurable as asynchronous serial ports;
4 are configurable as clocked serial ports (SPI);
2 are configurable as SDLC/HDLC serial ports;
1 asynchronous serial port is shared with the XBee RF module
1 asynchronous serial port is used during programming
XBee RF Module
Digi International
®
XBee
®
ZB (802.15.4 standard, ISM 2.4 GHz)
XBee Firmware
ZNet 2.5
RCM4510W (ZNet) (20-101-1207)
ZigBee PRO
RCM4510W (ZB) (20-101-1269)
