User’s Manual
17
3.2 Sample Programs
Of the many sample programs included with Dynamic C, several are specific to the RCM4510W
modules. These programs will be found in the
SAMPLES\RCM4500W
folder.
•
CONTROLLED.C
—Demonstrates use of the digital outputs by having you turn LEDs DS2 and
DS3 on the Prototyping Board on or off from the
STDIO
window on your PC.
Parallel Port B bit 2 = LED DS2
Parallel Port B bit 3 = LED DS3
Once you compile and run
CONTROLLED.C
, the following display will appear in the Dynamic
C
STDIO
window.
Press “2” or “3” on your keyboard to select LED DS2 or DS3 on the Prototyping Board. Then
follow the prompt in the Dynamic C
STDIO
window to turn the LED ON or OFF. A logic low
will light up the LED you selected.
•
FLASHLED1.C
—demonstrates the use of assembly language to flash LEDs DS2 and DS3 on
the Prototyping Board at different rates. Once you have compiled and run this program, LEDs
DS2 and DS3 will flash on/off at different rates.
•
FLASHLED2.C
—demonstrates the use of cofunctions and costatements to flash LEDs DS2
and DS3 on the Prototyping Board at different rates. Once you have compiled and run this pro-
gram, LEDs DS2 and DS3 will flash on/off at different rates.
