User’s Manual
104
software ................................... 6
external I/O bus ........... 33, 47
I/O drivers ......................... 47
libraries
RCM45xxW.LIB .......... 52
serial communication drivers
....................................... 47
version compatibility .......... 6
ZigBee drivers ................... 49
specifications
bus loading ........................ 77
digital I/O buffer sourcing and
sinking limits ................ 77
exclusion zone ................... 71
header footprint ................. 75
Prototyping Board ............. 88
Rabbit 4000 DC characteris-
tics ................................. 76
Rabbit 4000 timing diagram
....................................... 78
RCM4510W ...................... 69
dimensions .................... 70
electrical, mechanical, and
environmental ............. 72
relative pin 1 locations ...... 75
XBee RF module .............. 74
spectrum spreader ................. 79
settings .............................. 42
subsystems
digital inputs and outputs .. 26
switching modes ................... 37
T
technical support ................... 16
U
user block
determining size ................ 47
function calls ..................... 47
readUserBlock() ............ 43
writeUserBlock() ........... 43
reserved area for calibration
constants ....................... 47
X
XBee firmware ....................... 6
upgrading to ZB ................ 58
ZB ................................. 6, 58
Znet 2.5 ......................... 6, 58
Znet 2.5 vs. ZB ................. 58
XBee RF module
additional resources .......... 67
firmware download ......... 101
function calls
xb_sleep() ...................... 99
zb_Rabbit_poweroff() ... 99
Z
ZigBee
software libraries .............. 49
ZigBee protocol
coordinator ........................ 57
end device ......................... 57
introduction ....................... 57
mesh network .................... 57
router ................................. 57
