![background image](http://html1.mh-extra.com/html/rabbit/rabbitcore-rcm3309/rabbitcore-rcm3309_user-manual_3119427039.webp)
Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 20-101-1194 - MODULE RABBITCORE RCM3309 ROHS
Contact us: [email protected] Website: www.integrated-circuit.com
32
RabbitCore RCM3309/RCM3319
A program “runs” in either mode, but can only be downloaded and debugged when the
RCM3309/RCM3319 is in the Program Mode.
Refer to the
Rabbit 3000 Microprocessor User’s Manual
for more information on the pro-
gramming port.
4.3.2 Standalone Operation of the RCM3309/RCM3319
The RCM3309/RCM3319 must be programmed via the Prototyping Board or via a similar
arrangement on a customer-supplied board. Once the RCM3309/RCM3319 has been pro-
grammed successfully, remove the programming cable from the programming connector
and reset the RCM3309/RCM3319. The RCM3309/RCM3319 may be reset by cycling the
power off/on or by pressing the
RESET
button on the Prototyping Board. The RCM3309/
RCM3319 module may now be removed from the Prototyping Board for end-use
installation.
CAUTION:
Disconnect power to the Prototyping Board or other boards when removing
or installing your RCM3309/RCM3319 module to protect against inadvertent shorts
across the pins or damage to the RCM3309/RCM3319 if the pins are not plugged in
correctly. Do not reapply power until you have verified that the RCM3309/RCM3319
module is plugged in correctly.
39 / 191
39 / 191