background image

5

Preparation

List of Parts

Remote Control

1. Filter Installation

CAUTION

To maintain the quality of the filters, they are placed in the unit within plastic bags.
Please remove the filters from the plastic bags before using the unit.

Step 1

Place the unit facing up and Remove the front panel

Lay the unit on a flat surface such as table or floor.  Make sure not to pinch the power cord on the rear of the unit.
Put your hands at the bottom of the front panel and lift the panel up gently.

Step 2

TM

Remove Plastic bags from the BioGP  HEPA filter and Washable charcoal based 

activated carbon filter.

Remove the pre-filter from the unit.

TM

Remove Plastic bags from the  BioGP  HEPA filter and Washable charcoal based activated carbon filter.
First, install the Washable charcoal based activated carbon filter. The filter handle should be facing the front panel.

Step 3

Re-insert the pre-filter and the front panel.

First, install the pre-filter. The filter handles should be facing the front panel.
Re-insert the front panel back to the unit.  Press in the hooks on the bottom of the front panel into the unit. 
 You should hear a "click" sound if installed properly.

Inserting Battery in the Remote Control.

Flip over the remote control.  Press and
 slide out the battery holder

1

Insert battery with positive side facing up.

2

Close the battery holder.

3

Nano-silver
Pre-Filter

TM

BioGP  HEPA
Filter

Washable charcoal 
based activated 
carbon filter

3V Lithium 
Coin Battery

TM

Install the BioGP  HEPA filter with the word "Front" on the filter frame face toward you.

1

2

1

2

3

4

1

2

Battery Information

The batteries for this remote control are for initial use only. Change the batteries when necessary.
Incorrect usage of the batteries may cause battery fluid leakage and/or damage.
When replacing battery, replace battery with new one of the same type (Use 3V Lithium Coin Battery).
When not using the unit or remote control for an extended period, remove the batteries. 
(This prevents malfunction of the remote control from battery fluid leakage.)
The batteries are for initial use only and may be depleted within 1 year.

Rabbit Air

Summary of Contents for BioGP SPA-421A

















Reviews: