4
Main Unit Display
Remote Control Operation
Transmitter
Standby Button
Pressing this button will put the unit to standby mode.
Negative Ion Mode Button
Unit will generate negative ion by pressing this button.
Turbo Mode Button
Unit will operate at the highest fan speed for 10 minutes
and then changes to Auto mode.
Pollen Mode Button
This mode of operation is good for the pollen season.
The unit will alternate between low and medium fan
speed every 10 minutes
Fan Level Button
The fan speed can be switched between Low, Medium,
High and Turbo.
Auto Mode Button
Silent or Sleep Mode Button
Timer Button
The fan speed of the air cleaner will
change automatically depending on the
amount of impurities in the air as detected
by the dust and odor sensors.
Unit will operate at a lower fan speed and
the operation is totally silent.
Us d to set the Off Timer.
The set time switches every time the button
is pressed as shown below.
e
1 hours
2 hours
off timer
4 hours
The indicator light shows the remaining time.
The unit stops operating when the timer is up.
Remote Control Receiver
Rabbit Air
Negative Ion Indicator
Unit will generate negative ion when this
indicator is on.
Filter Cleaning Indicator
The filter cleaning indicator will illuminate
when it is time to clean the filters and reset
the indicator.
Filter Replacement Indicator
The filter replacement indicator will illuminate
when it is time to replace the filters and reset
the indicator.
Particle/Dust Level Indicator
Indicates level of dust or patricles by
changing color in five steps from light green,
green, yellow, orange to red. (Light Green
represents good air quality & Red represents
poor air quality)
Fan Level Indicator
Indicates the fan speed of the air purifier.
Main Control Button
You can change operation modes, turning
the unit on and off or changing the fan
speed of the unit by using this control button.
Operation Mode Indicators
Indicator lights for Auto Mode, Turbo
Mode, Sleep Mode and Pollen Mode.
Timer Display Indicator
Unit will turn off automatically after pre-
set time duration.
Odor/Chemical Level Indicator
Indicates chemical and odor levels by
changing color in five steps from light
green, green, yellow, orange to red.
(Light Green represents good air quality
& Red represents poor air quality)
Unit Status Indicator
Unit status indicator will stay on when the air purifier
is on standby or is operating. The indicator will flash
for 15 seconds when the air purifier is detecting the
air quality baseline.
