INSTRUCTIONS
STEALTH STL360 INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
INSTALLATION (
cont’d)
Fig: 13
Fig: 16
Locate for Movement Across Pattern
Check that movement is not directly towards sensor. Sensor is more
sensitive
ACROSS
its pattern
(Fig 13)
. Check that movement far
away and directly towards sensor is not entirely within one zone. To
fix, change the sensor angle or location as shown in Fig 14.
Mounting and Wiring
Red pigtail is only used to switch remote or additional fixtures
as shown in Fig 16.
STL360 floodlight kits come pre-wired and assembled on the
RAB CU4 EZ Plate
allowing for mounting on round, rectangular
or octagonal surface or recessed boxes.
Fig: 14
Fig: 15
Choose a Protected Location
Mount sensor in protected area. The more protected the mounting
location, the less chance of lights turning on occasionally during
rain, snow and windstorms. This could happen because the sensor
is detecting dramatic changes in temperature as shown in Fig 15.
More sensitive
Less
sensitive
Better detection after
“micro adjustment”
WRONG
OK!
STL360 KIT ASSEMBLY AND WIRING
Insert
close-up
plug in
unused
hole
Finishing
Cap
Bar Screws
Gasket &
Surface Plate
Universal
Mounting
Bar
Hook
O-Ring
Gasket
CU4 EZ Plate
Gasket
Center
Screw