STEALTH-IN-1114
•
2 Lens Masks
•
Indoor Switchplate Label
•
3 Wire Nuts
•
Adjustment Tool
•
Mylar lens Mask
•
Crossbar with Green
Ground Screw
•
Hanging Hook
•
1/2” Close Up Plugs (3)
•
Slotted Screws (4)
•
Finishing Cap
•
O-ring Gasket
•
Center Mounting Screw
•
Metal Surface Mounting Plate
with Gasket
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2014 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
Contents of Accessory Kit
Limited Warranty
21
22
The RAB Mini Sensor will be free from defects
in materials and workmanship for a period of
five (5) years from the date of delivery to the
end-user.
Sensors must be installed by a properly
insured and licensed electrician or under
the supervision of a licensed electrician
and the product must be in its original,
unopened and new condition at the time
of installation. The information provided in
the RAB Sensor Owner’s Manual is critical
in determining the location, conditions,
intended use and other requirements with
respect to the use and installation of a
sensor product. Using a sensor product in
any manner other than as disclosed in the
RAB Owner’s Manual automatically voids
the warranty.
Exceptions. The above warranties shall not
apply and RAB makes no representations or
warranties with respect to:
a. problems caused by acts of God including
without limitation lightning strikes; and
b. problems caused by any improper action or
failure to act by any person or entity other RAB,
including without limitation problems caused
by improper installation by the buyer, an
authorized RAB distributor, or any other person
or entity; and
c. using or installing a sensor product in any
manner other than as disclosed in the RAB
Owner’s Manual.
d. use with Instant Start ballasts; use with
Instant Start ballasts will void the RAB warranty.
Out of warranty sensors replacement program.
If your sensor is out of warranty or if damage
is unrelated to its original manufacture, return
your sensor (freight prepaid and insured)
directly to us (at RAB Lighting Inc. 170 Ludlow
Ave. Northvale, NJ 07647) with a check for
$20.00 made payable to RAB Lighting Inc. We
will repair or replace your sensor promptly.
Toll Free Technical Assistance
If you need technical assistance, please
do the following:
1. Re-read the Technical Tips sections of
this manual.
2. Call the Tech Help Line at 888 RAB-
1000, 8AM to 6PM Eastern Time M-F
and we will be glad to help you.
Before you call, please have the
following information handy:
Note: These instructions do not cover
all details or variations in equipment
nor do they provide for every possible
situation during installation operation or
maintenance.
a) Catalog number of your unit;
b) Wattage, types and locations of
lights connected to the sensor;
c) The electrical circuit on which the
sensor is installed. What else does
it feed? How is the sensor power
switched?
d) Serial Number (4 digits) on the back
of the sensor.
e) This installation Manual
RAB Lighting cannot give electrical
wiring instructions by phone. Please
consult a qualified electrician
The following warranties apply to RAB Lighting, Inc. (“RAB”)
products that meet all of the following conditions: (a) the
product was purchased by the contractor or end-user
from an authorized RAB distributor who purchased the
product directly from RAB and from no other source; (b) if
the product has been installed, the entire installation was
performed by a licensed electrician or under the supervision
of a licensed electrician and the product was in its original,
unopened and new condition at the time of installation.
RAB LIGHTING DISCLAIMS ALL REPRESENTATIONS AND
WARRANTIES WITH RESPECT TO ALL OTHER PRODUCTS,
INCLUDING WITHOUT LIMITATION PRODUCTS THAT HAVE
BEEN PURCHASED FROM ANY PERSON OR ENTITY OTHER
THAN AN AUTHORIZED RAB DISTRIBUTOR, OR INSTALLED
BY ANY PERSON OR ENTITY OTHER THAN A LICENSED
ELECTRICIAN OR UNDER THE SUPERVISION OF A LICENSED
ELECTRICIAN, AND ALL PRODUCTS THAT ARE USED OR
ARE OTHERWISE NOT IN THEIR ORIGINAL RAB LIGHTING
PACKAGING AT THE TIME OF INSTALLATION.
Remedy. RAB’s obligations for breach of warranty shall be
limited to repair or replacement, at RAB’s option, of any
products or parts which prove to be defective, provided that
buyer gives RAB written notice and returns the defective
product to RAB in accordance with RAB’s return material
authorization (RMA) policies, and RAB confirms the defect.
Buyer is responsible for all costs to de-install defective
products and re-install replacement or repaired products
and RAB shall not be liable for labor or other costs related to
de-installation or re-installation.
DISCLAIMER. THE FOREGOING WARRANTIES ARE
IN LIEU OF, AND RAB EXPRESSLY DISCLAIMS, ALL
OTHER REPRESENTATIONS, GUARANTEES AND
WARRANTIES, EXPRESS OR IMPLIED IN FACT OR BY LAW,
INCLUDING WITHOUT LIMITATION ALL WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR OTHERWISE. THE FOREGOING WARRANTIES
STATE RAB’S ENTIRE AND EXCLUSIVE LIABILITY, AND BUYER’S
SOLE AND EXCLUSIVE REMEDY, IN CONNECTION WITH THE
PRODUCTS AND ALL PARTS, THEIR DESIGN, SUITABILITY FOR
USE, INSTALLATION AND OPERATION.
LIMITATION OF LIABILITY. RAB shall not be liable under
any theory of relief, including without limitation breach of
warranty, breach of contract, tort (including negligence),
strict liability, or otherwise, arising out of or related to any
breach of warranty, any RAB products and the use thereof,
or any other acts or omissions of RAB for: (i) any indirect,
incidental, special or consequential damages, whatsoever
(including without limitation, loss of anticipated value of
a business or its reputation) or (ii) any damage or loss in
excess of the price actually paid by buyer to the authorized
RAB distributor for the products that caused the damages.
Any action by buyer must be commenced within one year
after the cause of action has accrued.
Miscellaneous. These product warranty terms shall be
governed by the laws of the State of New York. Buyer
consents to the personal jurisdiction and venue of the
courts of the State of New York. Any legal or equitable
claim of any nature arising hereunder shall be filed and
maintained in the state or federal courts in the State of New
RAB Lighting
Product Warranties
York and buyer agrees that such courts are a convenient
forum for adjudication. In the event that suit is necessary
to recover amounts owed RAB, buyer shall be liable for
reasonable attorney’s fees, interest and costs of collection.
No agreement or understanding varying the terms and
conditions hereof shall be binding upon RAB or buyer unless
in writing and signed by duly authorized representatives of
both parties. These product warranty terms shall inure to
the benefit of and be binding upon the parties hereto and
their respective successors and assigns.