![background image](http://html1.mh-extra.com/html/rab-lighting/wpled26dc/wpled26dc_installation-instructions_3122861004.webp)
WPLED20DC INSTALLATION INSTRUCTIONS
TROubLesHOOTINg
1.
Check that the line voltage at fixture is correct. Refer
to wiring directions.
2.
Is the fixture is grounded properly?
WPLED20DC-IN-0213
cLeANINg & MAINTeNANce
CAUTION: Be sure fixture temperature is cool
enough to touch. Do not clean or maintain while
fixture is energized.
1.
Clean glass lens with non-abrasive glass cleaning
solution.
2.
Do not open fixture to clean the LED. Do not touch
the LED.
JuNcTION bOx
1.
The Junction box has (4) conduit entry points on the
center of each side and (1) in the center back.
2.
Mounting Points
are dimensioned below.
US and International Patents Pending
4 3/4”
2 3/16”
3 1/2”
1 1/8”
1 1/8”
Mounting Points
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
WIRINg
Universal DC voltage driver permits operation at
10VDC to 30VDC.
1.
Connect the WHITE fixture lead to the
(+) supply lead.
2.
Connect the BLACK fixture lead to the
(-) supply lead.
3.
Connect the bare copper Ground wire from fixture
to supply ground.
(+)
(+) WHITE
(-)
(-) BLACK