5
Gotcha Kit Assembly and Wiring
Gotcha floodlight kits come pre-wired and
assembled on the RAB CU4 EZ plate, allowing for mounting on round,
rectangular or octagonal surface or recessed boxes.
Mounting
1. Attach the Universal Mounting bar with the bar screws (provided) to the
junction box. If you are attaching your kit to a surface mount weatherproof
box, you must use both gaskets, with the metal mounting plate sandwiched
between.
2.
Easy Wiring Tip:
Use the “S” shaped Hands Free
Hanging Hook to hold the EZ plate
during wiring.
3. Bring power leads and sensor kit
leads through holes in all gaskets
into junction box.
4. Strip off at least 1/2" of insulation from all
leads, and insert through openings in gas
kets and mounting plate.
Insert
close-up
plug in
unused
hole
Finishing
Cap
Metal Mounting
Plate
Bar Screws
Gasket
Universal
Mounting
Bar
Gasket
O-Ring
Gasket
Hook rests in
notch on
crossbar
