ALED 52W INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
®
POLE DRILING DETAIL
For non-RAB poles use these dimensions to drill the pole. This template is not to scale. Please use measurements shown.
WIRING
Universal voltage driver permits operation at 120V to 277VAC,
50 or 60 Hz except fixtures factory ordered with a 120V swivel
photocell (/PCS) or 277V swivel photocell (/PCS2)
1.
Connect the BLACK fixture lead to the (+) LINE supply lead.
2.
Connect the WHITE fixture lead to the (-) COMMON supply
lead.
3.
Connect the bare copper Ground wire from fixture to
supply ground.
TROUBLESHOOTING
1. Check that the line voltage at the fixture is correct. Refer
to wiring directions.
2. Is the fixture grounded properly?
3. Be sure the photocell, if used, is functioning properly.
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough
to touch. Do not clean or maintain while fixture is
energized.
1.
Clean glass lens with non-abrasive glass cleaning
solution.
2.
Do not open the fixture to clean the LED. Do not touch
the LED.
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2013 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
ALED52 IN 0114
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during
installation, operation or maintenance.
Patents: US:
pat. D653,377
