background image

ALED 52 & WPLED 52 BILEVEL INSTRUCTIONS

Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. 
Call the Marketing Department at 888-RAB-1000 or email: [email protected]

®

®

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

.

 

Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required 

for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON 

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

  

WARNING: 

Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.

Easy Installation & Product Help

Tech Help Line

Call our experts 888 RAB-1000

©2012 RAB LIGHTING Inc.

Northvale, New Jersey 07647 USA

rabweb.com

Visit our website for product info

email

Answered promptly [email protected]

ALED52/BL WPLED52/BL IN 0414

MOUNTING ARM ON FIXTURE

 

1.  Bi-level fixtures have LED’s wired in pairs. The two pairs are shown below. 

2.  Each pair has leads brought through the arm and labeled. 

3.  Use the pairs for switching as needed in your application. 

Set #2

Set #1

Summary of Contents for ALED 52W

Page 1: ...PAD4 Do not use bolster plate 4 Knot wires in pole for strain relief and feed wires from the pole into the Pole Arm Make the necessary wiring connections in the Pole Arm 5 Install the Arm Gasket on to the Pole Arm Cover Plate and secure it with the screws Cover the screws with provided caps Install the Pole Cap Bolster Plate Housing Pole Arm Bolts Washer and Lockwasher Pole Cap Pole Gasket Pole Ar...

Page 2: ... Ground wire from fixture to supply ground TROUBLESHOOTING 1 Check that the line voltage at the fixture is correct Refer to wiring directions 2 Is the fixture grounded properly 3 Be sure the photocell if used is functioning properly CLEANING MAINTENANCE CAUTION Be sure fixture temperature is cool enough to touch Do not clean or maintain while fixture is energized 1 Clean glass lens with non abrasi...

Page 3: ...res Our goal is to design the best quality products to get the job done right We d like to hear your comments Call the Marketing Department at 888 RAB 1000 or email marketing rabweb com ALED52 Cool ALED52N Neutral ALEDFC52 Cool ALEDC52 Cool ALEDC52N Neutral ALEDFC52N Neutral ...

Page 4: ...D IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED WARNING Make certain power is OFF before installing or maintaining fixture No user serviceable parts inside Easy Installation Product Help Tech Help Line Call our experts 888 RAB 1000 2012 RAB LIGHTING Inc Northvale New Jersey 07647 USA rabweb com V...

Reviews: