20
A
B
A
C
D
B
G
B
POMMEL AND BACK
EXTENSION
The fittings for the pommel are to be mounted
under the seat cushion with the 4 mm Allen key.
Then place the pommel in the fittings as shown
(A). Tighten under the seat.
Mount the back extension in the head support fit-
tings on the back as shown (B). Back extension,
head support and swing away shoulder supports
can be mounted at the same time.
GB
PUSH HANDLE
Disassemble the existing handles by pushing the
springs (A), loosening the knob (B) and lifting off
the handles.
Mount the new push handle and adjust the height
by pushing the springs (C) and place the push
handle in the desired position and tighten the
knobs (B).
The new push handle can easily be angle adju-
sted by pushing the buttons on each side (D).
GB
