R82 Panther User Manual Download

Page: 7 / 40

ROADABILITY 2/4

Driving DOWN kerbs (max. 10 cm)

Forwards

This technique is recommended for the experi-

enced users.

* Make sure the anti-tip device is deactivated

* Drive forward towards the kerb

* Pull hard on the hand rims and drive forward.

All wheels will touch the ground a the same

time.

Forwards, with assistance

* Make sure the anti-tip device is deactivated

* Drive forward towards the kerb.

* Tilt the chair backwards to lift the front

wheels.

* Drive carefully down the kerb and put down

the front wheels.

Backwards

This technique must never be used if the height

difference is more that 10 cm and only by expe-

rienced users.

* Make sure the anti-tip device is deactivated

* Drive backwards towards the kerb

* Bend forward and drive carefully down the

kerb.

High tilting risk at this technique

Backwards, with assistance

* Make sure the anti-tip device is deactivated

* Drive backwards towards the kerb.

* Drive carefully down the kerb and pull the

chair away from the kerb.

* Put down the front wheels.

Summary of Contents for Panther








































Search results

Summary of Contents for Panther

Reviews:

Related manuals for Panther

Brands by name

Popular brands

R82 Panther, User Manual

Search results

Summary of Contents for Panther

Reviews:

Related manuals for Panther

Brands by name

Popular brands