R82 Panda Futura Manual Download

Page: 22 / 24

PELVIS HARNESS

Mount the fixlocks in the seat. See page 18.

Follow the instructions below, with help from

page 18.

* Open the buckles (G).

* Mount the straps (D) in the belt fittings under

the seat (D).

* Place the user on the harness and close the

buckles (G) over the thighs.

Take care that all the fixations and adjust-

ments are placed and fitted correctly and

check it on a regular basis.

ANKLE STRAPS

The ankle straps can be opened and closed by

using the velcro or the buckle (A).

Follow the instructions below for mounting.

* Remove the buckles (C).

* Pull the straps (B) through the slides in the

foot plates.

* Mount the buckles (C) again and make sure

the straps do not slide off.

Take care that all the fixations and adjust-

ments are placed and fitted correctly and

check it on a regular basis.

Summary of Contents for Panda Futura
























Search results

Summary of Contents for Panda Futura

Reviews:

Related manuals for Panda Futura

Brands by name

Popular brands

R82 Panda Futura, Manual

Search results

Summary of Contents for Panda Futura

Reviews:

Related manuals for Panda Futura

Brands by name

Popular brands