background image

E

N

PANDA FUTURA

Congratulations on purchasing the Panda Futura from R82. We are convinced, 

that it will fully live up to your expectations.

Intended purpose

The Panda seat is available in two different versions: Panda Standard and Panda 

Active. The Standard seat is primarily for children with the need of support around 

the arms and shoulders. The Active seat is for the active children who need more 

freedom of movement. 

The Panda Futura is suitable for users needing an individual seating system and 

base, e.g. Children/youngsters with:

•  CP at GMFCS level III-V

•  Developmental delays 

Please note that the product is not suitable for Children/youngsters with strong 

extensor spasticity.

On both versions, the back can be reclined independently from the seat base. The 

many adjustment possibilities and wide range of accessories make it possible to 

adjust the seat to an individual child’s needs for comfort and support. The Panda 

is for both indoor and outdoor use, depen dent on which frame you use.

This manual will enable you to take full advantage of the many possibilities of the 

Panda Futura.

3

Summary of Contents for Panda Futura

























Reviews: