R2TECK DVL-2, User Manual

Page: 4 / 25

2
The monitor shows logo "R2TECK" after receiver connect to the power.
After that, the monitor shows progress bar: Start-up / Selfcheck / Link.
Monitor real-time display the camera video when the transmitter connect to receiver.
Wait upper cabin GPS light turn-on.
When the monitor display is normal, place the transmitter and receiver to the same position. Press
POSITION CONFIRM button 2 seconds to confirm the coordinate of starting point. GPS light flash means
the coordinate successful be confirmed.
After that, don’t move the receiver position (please confirm the coordinate again in offline status if move
the receiver position).
Make transmitter from receiver more than 10 meters away, press MODE button 2 seconds, will switch
from offline mode to tracking mode. MODE light turn-on.
1.1.4 Mobile

The mobile connect the wifi network "R2TECK_DVL1", WIFI password "12345688"

wait for connecting

Run the APP (if the APP is already running, turn off it first then run again)

The mobile real-time display the camera video, the MOBILE light on the receiver turn-on.
Attention: Currently only allow working one mobile, if want to change the mobile, please follow below process:
Disconnect the mobile with receiver wifi network.
Wait receiver MOBILE light turn off.
Repeat the above 4 steps.
IOS App installation: In App store, search the key word
“
r2teck
”
and download.
Android installation: In 360 mobile assistant, search the key word “r2teck” and download.
In Google play, search the key word “r2teck” and download.