R2TECK DVL-2, User Manual

Page: 18 / 25

16
6. Installation
6.1 Transmitter installation
6.1.1 Antenna installation

Take out two pcs transmitter antenna.

Install them on the transmitter antenna holes.
6.1.2 HDMI cable installation
One port of cable connects to the camera, another port of cable connects to the transmitter.
6.1.3 power cable installation
one port with terminals of the cable should be connected with transmitter power port, the other port of
cable should be connected with power 12V-DC, the red cable is positive, the black is negative.
6.1.4 OSD cable installation
Connect the OSD data output port of OSD module with the OSD port of transmitter.
6.2 Receiver installation
6.2.1 HDMI cable installation
One port of HDMI cable connect to the monitor, the other port of HDMI cable connect to the
receiver.
6.2.2 GPS installation
Connect the GPS module on the GPS port of upper cabin side. (Keep horizontal)
6.2.3 Power cable installation
Supported DC power by the receiver.
Support 12V-DC power, suggest the output power is more than 2A.
6.2.4 Mobile APP installation
IOS App installation: In App store, search the key word “r2teck” and down load.
(* We recommend users take priority for iphone not ipad, as the ipad display screen differs too much,
which makes the Video resolution not the best performance. Pls choose
“
only support by Iphone”
when you are using Ipad for downloading the APP.)
For Android Users: Pls go to “Google Play” get “r2teck” then download.
For Android Users: Pls go to Google play, search the key word “r2teck” and download.