8 / 24
User Manual
Rev. 1.0 - 13/03/09
TELINK-SNMP1
Menu 2
Nota : Use a MIB BROWSER (not included) to use the MIB of RVR equipments.
These are usually provided in an accompanying CD with the system in which the
TELINK-SNMP1 is installed.
5.3
Management
Firmware
5.3.1 Reading and Settings of Measurement
Each transmitter has a range of measures that can be read. Please refer to MIB
for a detailed description of each measurement. The transmitter has an SCI (Serial
Communication Interface) owner, that reads and stores the telemetry data in the
Main card. The Main card then sends the data to the ANTLAN SNMP card for
formatting/analysis which fi nally export the data obtained as SNMP.
In the following you can fi nd the list of typical measures of transmitter. For simplicity
are shown only those related to 10kW transmitter, but the same tree is also used
to power different transmitters.
Nota : In the following examples is used a MIB browser of ANTGroup, but any
MIB Browser can be used.
The MIB are specifi ed the range and description of each variable, in this case the
forward power and possible alarms, which are reported into the description box at
the end. If the READ ONLY and MANDATORY conditions are present, they mean
that the value is been obtained.