R.V.R. Electronica discovery, User Manual

Page: 23 / 48

DISCOVERY
19 / 44 User Manual Rev. 2.1 - 27/11/03
During the normal operation of the CPU-SWITCH, the addressed assigned to the
appliance may be changed, during the parameters entry phase.
To do that, select Read Status from Menu Micro. This operation reads from the
CPU-SWITCH the following parameters:
Peripheral Talk Address.
Peripheral Type.
Software Version.
Error/Status Code.
Out to Stereo Coder.
Out to Mpx.
The user is allowed to change the field relevant to the Peripheral Talk Address if a
new value is entered (1-127), and whereas button OK is pressed, the new value is
stored in the CPU-SWITCH E²prom.
N.B.: Every time the CPU-SWITCH is switched off or disconnected from RS232
when program Switch.exe runs, the following error message may be displayed:
Error code 24.