R.V.R. Electronica discovery, User Manual

Page: 17 / 48

DISCOVERY
13 / 44 User Manual Rev. 2.1 - 27/11/03
Table summarising level times that may be selected
The control needs for four times:
Start Up Time (1 - 250 sec.).
Commutating Time for Analogue Signals. (5 - 255 sec.).
Commutating Time for Digital Signals. (5 - 255 sec.).
Restore Time (1 - 30 min.).
Minimum Level (-18 / -0.2 db).
Maximum Level (+0.2 / +6 db).
When even one only control on the analogue signal is enabled, also specify the
minimum and maximum level it has to be performed.
5.3.7 Views: the "View" Menu
During standard operation, the display visualises the analogue level of the channel
that is currently sent to the output stage.
When you want to check the level of a non-primary channel, you need to enter
menu View and select the desired channel. Even this menu is operative only if the
LED showing the manual status is ON.
To change the view channel parameters, operate as follows:
1) Move the cursor to the Var menu and press key OK.
2) Using arrow keys, move the menu to the field concerned and press key OK.
3) Using arrow keys, scroll the several configurations and press key OK.
4) Press key ESC to go back to the main menu.
5) Repeat point 2 to change another parameter.